| Control station type: |
Double insulated |
| Enclosure material: |
Polypropylene |
| Electrical circuit type: |
Control circuit |
| Enclosure type: |
Complete ready for use |
| Control station application: |
Control of 2-speed hoist motor |
| Control station composition: |
2 push-buttons + 1 emergency stop |
| Control button type: |
Emergency stop push-button Ø 30 mm 3 NC trigger actionFirst push-button 1 NC + 2 NO raise, slow-fastSecond push-button 1 NC + 2 NO lower, slow-fast |
| Product compatibility: |
XENT1192 for emergency stopXENG1191 for each direction |
| Mechanical interlocking: |
With mechanical interlocking |
| Control station colour: |
Yellow |
| Connections - terminals: |
Screw clamp terminals, 1 x 0.5...1 x 2.5 mm² without cable endScrew clamp terminals, 1 x 0.5...2 x 1.5 mm² with cable end |
| Standards: |
EN/IEC 60204-32EN/IEC 60947-5-5EN/ISO 13850: 2006CSA C22.2 No 14UL 508EN/IEC 60947-5-1 |
| Product certifications: |
GOSTCCC |
| Protective treatment: |
TH |
| Ambient air temperature for operation: |
-25...70 °C |
| Ambient air temperature for storage: |
-40...70 °C |
| Vibration resistance: |
15 gn (f= 10...500 Hz) conforming to IEC 60068-2-6 |
| Shock resistance: |
100 gn conforming to IEC 60068-2-27 |
| Overvoltage category: |
Class II conforming to IEC 61140 |
| IP degree of protection: |
IP65 conforming to IEC 60529 |
| IK degree of protection: |
IK08 conforming to EN 50102 |
| Mechanical durability: |
1000000 cycles |
| Cable entry: |
Rubber sleeve with stepped entry 8...26 mm |
| Contact code designation: |
A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix AA600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix AQ600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix AQ600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A |
| [Ithe] conventional enclosed thermal current: |
10 A |
| [Ui] rated insulation voltage: |
Emergency stop contact: 400 V (pollution degree 3) conforming to IEC 60947-1600 V (pollution degree 3) |
| [Uimp] rated impulse withstand voltage: |
6 kV conforming to IEC 60947-1 |
| Contact operation: |
Slow-breakStaggered |
| Maximum resistance across terminals: |
25 MOhm |
| Operating force: |
14 N emergency stop18 N push-button |
| Short-circuit protection: |
10 A fuse protection by cartridge fuse type gG |
| Rated operational power in W: |
40 W DC-13 for 1000000 cycles, operating rate 48 W DC-13 for 1000000 cycles, operating rate 65 W DC-13 for 1000000 cycles, operating rate |
| Terminals description ISO n°1: |
(13-14)NO(21-22)NC(33-34)NO_CL |
| Terminals description ISO n°2: |
(11-12)NC(21-22)NC(31-32)NC |
| Terminal identifier: |
(11-12)NC(13-14)NO |
| Product weight: |
0.605 kg |