| Control station type: |
Double insulated |
| Enclosure material: |
Glass reinforced polyester |
| Electrical circuit type: |
Power circuit |
| Enclosure type: |
Complete ready for use |
| Control station application: |
Control of single speed hoist motor |
| Control station composition: |
4 push-buttons |
| Control button type: |
First push-button 2-pole raise, slowSecond push-button 2-pole lower, slowFourth push-button 2-pole left, slowThird push-button 2-pole right, slow |
| Product compatibility: |
XESD1191 for reversing operation |
| Mechanical interlocking: |
With mechanical interlocking between pairs |
| Control station colour: |
Yellow |
| Connections - terminals: |
Screw clamp terminals, 1 x 2.5 mm² with or without cable endScrew clamp terminals, 2 x 1.5 mm² with or without cable end |
| Standards: |
EN/IEC 60204-32CSA C22.2 No 14EN/IEC 60947-5-1 |
| Product certifications: |
CSA type 4 |
| Protective treatment: |
TH |
| Ambient air temperature for operation: |
-25...70 °C |
| Ambient air temperature for storage: |
-40...70 °C |
| Vibration resistance: |
15 gn (f= 10...500 Hz) conforming to IEC 60068-2-6 |
| Shock resistance: |
100 gn conforming to IEC 60068-2-27 |
| Overvoltage category: |
Class II conforming to IEC 61140 |
| IP degree of protection: |
IP65 conforming to IEC 60529 |
| Mechanical durability: |
1000000 cycles |
| Cable entry: |
Rubber sleeve with stepped entry 10...22 mm |
| [Ithe] conventional enclosed thermal current: |
12 A |
| [Ui] rated insulation voltage: |
500 V (pollution degree 3) conforming to IEC 60947-1600 V conforming to CSA |
| [Uimp] rated impulse withstand voltage: |
6 kV conforming to IEC 60947-1 |
| Contact operation: |
Snap action |
| Operating force: |
17 N push-button |
| Short-circuit protection: |
10 A fuse protection by cartridge fuse type aM |
| Rated power in hp: |
2 hp at 240 V, CSA certified3 hp at 600 V, CSA certified5 hp at 400 V, CSA certified |
| Rated operational power in W: |
2200 W AC-3 at 240 V conforming to IEC 60947-3 appendix A2200 W AC-3 at 400 V conforming to IEC 60947-3 appendix A2200 W AC-4 at 240 V conforming to IEC 60947-3 appendix A2200 W AC-4 at 400 V conforming to IEC 60947-3 appendix A |
| Electrical durability: |
300000 cycles AC-3, 2200 W at 240 V, operating rate 300000 cycles AC-3, 2200 W at 400 V, operating rate 300000 cycles AC-4, 2200 W at 240 V, operating rate 300000 cycles AC-4, 2200 W at 400 V, operating rate 500000 cycles AC-3, 1500 W at 240 V, operating rate 500000 cycles AC-4, 1500 W at 240 V, operating rate 800000 cycles AC-3, 1500 W at 400 V, operating rate 800000 cycles AC-4, 1500 W at 400 V, operating rate |
| Terminals description ISO n°1: |
(23-24)NO(13-14)NO(43-44)NO(33-34)NO |
| Terminal identifier: |
(11-12)NC(13-14)NO |
| Product weight: |
1.2 kg |